阻火器壳体结构与爆轰火焰状态关系研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP319

基金项目:

煤矿区煤层气抽采利用关键技术与装备(2016ZX05045);四川省科技计划重点研发项目(2017GZ0352)


The Study of the relationship between the structure of the fire arrester shell and the state of the detonation flame
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对大型煤矿瓦斯运输管道甲烷爆轰过程中火焰压力波和速度与阻火器结构的匹配问题,对阻火器壳体结构变化与管道内火焰压力和速度的关系进行了仿真研究,仿真中对不同尺寸的阻火器壳体结构建立了二维几何模型和网格模型,采用RNC k-e湍流模型和通用有限速率燃烧模型,运用FLUENT软件对煤管内可燃气体爆轰过程进行了模拟. 得到了阻火器壳体内径尺寸、阻火器内有无障碍物与爆轰火焰压力和速度的变化规律,通过分析阻火器内火焰速度和压力的规律,为管道爆轰阻火器的设计和选型提供更为准确的参考依据.

    Abstract:

    In view of the matching problem of flame pressure wave and velocity with the structure of fire arrester in the process of methane detonation, the authors conducted simulation study to analyses the relationship between the structural change of flame arrester housing and the pressure and speed of flame in the pipeline. During the simulation progress, two-dimensional geometric models and mesh models were built for different sizes of fire arrester shell structure. The RNC k-e turbulence model and the general finite rate combustion model were applied to simulate the detonation process of combustible gas in the coal tube by FLUENT software. We tried to understand the change law of the inner diameter of the flame arrester shell, the porosity of the flame arrester and the pressure and velocity of the detonation flame by analyzing the law of flame velocity and pressure in the flame arrester. The results provide us with an accurate reference for the design and selection of the pipe detonation arrester.

    参考文献
    相似文献
    引证文献
引用本文

引用本文格式: 王晓东,岳建平,龙 伟,黄吉民,罗红波. 阻火器壳体结构与爆轰火焰状态关系研究[J]. 四川大学学报: 自然科学版, 2018, 55: 705.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-01-31
  • 最后修改日期:2018-05-06
  • 录用日期:2018-05-18
  • 在线发布日期: 2018-07-05
  • 出版日期: